df02h thru DF10H glass passivated bridge rectifier reverse voltage - 200 to 1000 volts forward current - 1.0 ampere features mechanical data case : molded plastic terminals : tin plated, solderable per mil-std-750, method 2026 polarity : as marked on case weight : 0.38 gram maximum ratings and electrical characteristics ratings at 25 o c ambient temperature unless otherwise specified. maximum repetitive peak reverse voltage maximum average forward rectified current @ t a =40 o c peak forward surge current 8.3ms single half sine-wave superimposed on rated load (jedec method) maximum instantaneous forward voltage @ i f =1.0 a maximum dc reverse current at rated dc blocking voltage @t c =25 o c @t c =125 o c typical junction capacitance per element (note 1) typical thermal resistance, junction to ambient (note 2) operating junction and storage temperature range symbols v rrm i (av) i fsm v f i r c j r ja t j ,t stg 1.0 30 1.1 5 500 25 40 -65 to +175 units volts maximum rms voltage v rms volts maximum dc blocking voltage v dc 200 140 200 df02h 400 280 df04h 400 600 420 df06h 600 800 560 df08h 800 1000 700 DF10H 1000 volts volts amps amps ua pf i 2 t rating for fusing ( t < 8.3ms ) i 2 t 10.4 a 2 s o c / w o c notes : (1) measured at 1.0 mhz and applied reverse voltage of 4.0 v dc. (2) thermal resistance from junction to ambient mounted on p.c.b. with 0.5 x 0.5" ( 13 x 13mm ) copper pads. zowie technology corporation rev. 1 *dimensions in inches and (millimeters) dfm .323(8.20) .315(8.00) .335(8.50) .307(7.80) .102(2.60) .087(2.20) .256(6.50) .031(0.8) .244(6.20) .024(0.6) .205(5.2) .197(5.0) .022(0.55) .018(0.45) .193(4.9) .165(4.2) .350(8.9) .311(7.9) .079(2.00) .059(1.50) - + ~ ~ * halogen-free type * compliance to rohs product * glass passivated chip junctions * low forward voltage drop, high current capability * high surge current capability * designed for surface mount application * plastic material-ul recognition flammability classification 94v-0
ratings and characteristic curves df02h thru DF10H zowie technology corporation rev. 1 fig.1 - forward current derating curve fig.3 - typical instantaneous forward characteristics average forward rectified current, amperes 1.0 0.5 iinstantaneous forward current, amperes 0.10 1.00 10.00 0.01 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 0 0 25 50 75 100 125 150 pulse width=300us ambient temperature, o c instantaneous forward voltage, volts 60 hz resistive or inductive load fig.2 - maximum non-repetitive peak forward surge current peak forward surge current, amperes number of cycles at 60hz pulse width 8.3ms single half-sire-wave 0 5 10 15 20 35 30 25 1 10 100 fig.4 - typical reverse characteristics per bridge element percent of rated peak reverse voltage,% instantaneous reverse current, microamperes 0.01 0 0.10 1.0 10.0 100 20 40 60 80 120 140 100 fig.5 - typical junction capacitance reverse voltage, volts .1 1 junction capacitance, pf 100 .2 .4 1.0 2 4 10 20 40 100 10 t j =25 o c t j =25 o c t j =25 o c t j =100 o c
|